Skip to content
Resources

Exterior Cleaning Glossary

Plain definitions for the words that turn up on quotes, estimates and inspection reports.

The words that turn up on estimates and in conversations about exterior cleaning, in plain language. If something on your quote is not here, ask and we will explain it.

Methods

Pressure washing. Cleaning with water at high pressure. Right for hard surfaces that can take it, such as concrete driveways, patios and walkways. Wrong for almost everything attached to your house.

Soft washing. Low pressure plus a cleaning solution that does the work chemically instead of mechanically. The correct method for siding, stucco, wood, composite decking and asphalt shingle roofs. It is not a weaker version of pressure washing, it is a different process.

Power washing. Often used to mean the same thing as pressure washing. Strictly it means heated water. Most residential work does not need heat.

Downstreaming. Drawing cleaning solution into the water flow after the pump, so it goes on at low pressure and a safe dilution. This is how siding and roofs get cleaned without force.

Surface cleaner. The round attachment that runs two spinning jets under a housing. It cleans flat concrete evenly and avoids the striping a bare wand leaves.

PSI and GPM. Pressure and water volume. PSI is force, GPM is how much water moves. For most exterior cleaning, volume rinses better than force does, and force is what causes damage.

What is actually on the surface

Black streaks on a roof. Usually a hardy algae, not dirt and not mould. It feeds on limestone filler in asphalt shingles, which is why the streaks run downhill from the ridge. It comes off with a soft wash and returns faster on north-facing slopes that stay damp.

Algae, moss and lichen. Three different things. Algae is a surface stain. Moss holds water against the surface and lifts shingle edges. Lichen bonds into the surface and is the hardest of the three to remove without damage.

Efflorescence. The chalky white bloom that appears on concrete, brick and pavers. It is mineral salt carried to the surface by moisture moving through the material, then left behind when the water evaporates. It usually means water is getting in somewhere.

Spalling. Concrete flaking or popping off in thin layers, usually from water freezing inside the surface and expanding. Cleaning reveals it. Cleaning does not cause it, and no amount of washing repairs it.

Oxidation and chalking. Sun breaks down the surface of vinyl and aluminium siding and leaves a chalky powder. Washing removes the powder, which can make existing fading more obvious, particularly where part of a wall has been shaded.

Hard water spotting. Mineral deposits left on glass when sprinkler or tap water dries on it. Caught early it treats off. Left long enough it etches into the glass, and at that point the mark is in the glass rather than on it and no cleaning will remove it.

Artillery fungus. A mulch fungus that fires tiny dark spores onto siding and cars, where they bond like glue. It is one of the few things that often cannot be removed without damaging the surface underneath.

Concrete, pavers and sealing

Sealer. A coating applied after cleaning to keep water, salt and stains out. A penetrating sealer soaks in and leaves the look unchanged. A topical sealer sits on top and usually adds sheen.

Curing. The time a new slab or a fresh sealer needs before it is ready. New concrete generally needs about a month before sealing. A fresh sealer needs its full cure time before traffic, usually at least 24 hours and longer in cold or damp weather.

Joint sand. The sand between pavers that keeps them locked together. Aggressive washing blasts it out, after which the pavers shift and weeds move in. Pavers should be re-sanded after cleaning.

Around the house

Fascia. The board running along the roof edge that the gutters hang from. Overflowing gutters rot it first.

Soffit. The underside of the roof overhang, usually vented to let the roof breathe.

Downspout. The vertical pipe taking gutter water to the ground. A gutter can be perfectly clear and still fail if the downspout is blocked or drains against the foundation.

Post-construction film. The haze of dust, mortar, stucco and paint overspray left on glass and siding after building work. It is easier to remove in the first months than after a season of sun has baked it on.

Ready when you are

Still not sure what your property needs?

Tell us what you are looking at and we will tell you straight, including when the answer is that it does not need doing.